Views of MSL Hardware 12 Days after Landing
NASA/JPL/University of Arizona

Views of MSL Hardware 12 Days after Landing
ESP_028401_1755  Science Theme: Future Exploration/Landing Sites
German Portuguese Italian Dutch Icelandic Russian 


This is the third HiRISE image of MSL on the ground, a less oblique image with slightly higher resolution than the previous images.

The subimage shows a 4x reduced-scale overview, keyed to full-scale cutouts.

The new dark spots (left side) created streaks radial to the descent stage impact site, and may be from far-flung rocks or objects associated with the impact. There are 7 bright spots associated with the descent stage crash site as well that may be pieces of hardware.

There are also bright pieces scattered around the backshell, mostly downrange, and interesting detail in the parachute.

You can see the shadow of the MSL mast extending southeast (downsun) from the Curiosity rover.

This image was acquired looking more directly down (9 degree roll angle) than the prior images so the pixel scale is improved to approximately 0.27 m/pixel. Each cutout is individually stretched to best show the information without saturation. A special noise cleaning method was applied to the images by Paul Geissler of USGS.

Note: In addition to the anaglyphs linked below, this observation has other anaglyph products:
Map projected reduced resolution PNG
Full resolution JP2 downloadd

Written by: Alfred McEwen   (31 August 2012)

  Click to share this post on Twitter Click to share this post on Facebook Click to share this post on Google+ Click to share this post on Tumblr


 Image Products: All image links are drag & drop for HiView, or click to download
JPEG
Grayscale: map projected  non-map
IRB color: map projected  non-map
Merged IRB: map projected
Merged RGB: map projected
RGB color: non-map projected

JP2 DOWNLOAD
Grayscale: map-projected (574.7 MB)
IRB color: map-projected (375.6 MB)

JP2 EXTRAS
Grayscale: map-projected  (292.8 MB),
non-map  (286.0 MB)
IRB color: map projected  (110.6 MB)
non-map  (390.5 MB)
Merged IRB: map projected  (178.3 MB)
Merged RGB: map-projected  (170.2 MB)
RGB color: non map-projected  (371.4 MB)

ANAGLYPHS
Map-projected reduced-resolution (PNG)
Full resolution JP2 download
View anaglyph details page

ADDITIONAL IMAGE INFORMATION
Grayscale label   Color label
Merged IRB label   Merged RGB label
EDR products

About color products (PDF)
HiView main page

 Observation Toolbox
Acquisition date:17 August 2012 Local Mars time: 3:30 PM
Latitude (centered):-4.598° Longitude (East):137.448°
Range to target site:272.8 km (170.5 miles)Original image scale range:27.3 cm/pixel (with 1 x 1 binning) so objects ~82 cm across are resolved
Map projected scale:25 cm/pixel and North is upMap projection:Equirectangular
Emission angle:9.6° Phase angle:63.4°
Solar incidence angle:54°, with the Sun about 36° above the horizon Solar longitude:156.6°, Northern Summer
For non-map projected products:
North azimuth:97° Sub-solar azimuth:21.0°
For map-projected products
North azimuth:270°Sub solar azimuth:195.4°

Context map

Usage Policy
All of the images produced by HiRISE and accessible on this site are within the public domain: there are no restrictions on their usage by anyone in the public, including news or science organizations. We do ask for a credit line where possible: Image: NASA/JPL/University of Arizona
Postscript
For information about NASA and agency programs on the Web, visit: http://www.nasa.gov. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, Calif., manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. The image data were processed using the U.S. Geological Survey’s ISIS3 software.